A dry-grind ethanol from corn process analysis is performed. After defining a complete model of the process, a pinch technology analysis is carried out to optimise energy and water demands. The so-defined base case is then discussed in terms of production costs and process profitability. A detailed sensitivity analysis on the most important process and financial variables is carried out. The possibility to adopt different alternatives for heat and power generation combined to the process is evaluated.
KDF Search Results
Production costs of bio-ethanol from sugarcane in Brazil have declined continuously over the last three decades. The aims of this study are to determine underlying reasons behind these cost reductions, and to assess whether the experience curve concept can be used to describe the development of feedstock costs and industrial production costs. The analysis was performed using average national costs data, a number of prices (as a proxy for production costs) and data on annual Brazilian production volumes.
Production of ethanol from agriculutural and forestry residues, municipal solid waste, energy crops, and other forms of lignocellulosic biomass could improve energy security, reduce trade deficits, decrease urban air pollution, and contribute little, if any, net carbon dioxide accumulation to the atmosphere. Dilute acid can open up the biomass structure for subsequent processing. The simultaneous saccharification and fermentation (SSF) process is favored for producing ethanol from the major fraction of lignocellulosic biomass, cellulose, because of its low cost potential.
In the last decade biofuel production has been driven by governmental policies. This article reviews the national strategy plans of the world’s leading producers. Particular attention is dedicated to blending targets, support schemes and feedstock use. Individual country profiles are grouped by continent and include North America (Canada and the US), South America (Argentina, Brazil, and Colombia), Europe (the European Union, France, and Germany), Asia (China, India, Indonesia, Malaysia, and Thailand) and Australia.
The important key technologies required for the successful biological conversion of lignocellulosic biomass to ethanol have been extensively reviewed. The biological process of ethanol fuel production utilizing lignocellulose as substrate requires: (1) delignification to liberate cellulose and hemicellulose from their complex with lignin, (2) depolymerization of the carbohydrate polymers (cellulose and hemicellulose) to produce free sugars, and (3) fermentation of mixed hexose and pentose sugars to produce ethanol.
In this article the environmental and socio-economical impacts of the production of ethanol from sugarcane in the state of São Paulo (Brazil) are evaluated. Subsequently, an attempt is made to determine to what extent these impacts are a bottleneck for a sustainable and certified ethanol production. Seventeen environmental and socio-economic areas of concern are analysed.
Since the mid-1990s there has been a growing worldwide interest in alternative transport fuels, of which ethanol is among the most promising options. This interest has in recent years gathered pace, stimulated by high oil prices and the generally perceived view that this trend is likely to accentuate in the future. The need to reduce GHG emissions is also a fundamental reason for this interest. The focus of this paper is on fuel ethanol production from sugar and starches with emphasis on short-term issues and implications for the global market.
The rapidly expanding biofuel industry has changed the fundamentals of U.S. agricultural commodity markets. Increasing ethanol and biodiesel production has generated a fast-growing demand for corn and soybean products, which competes with the well-established domestic livestock industry and foreign buyers. Meanwhile, the co-products of biofuel production are replacing or displacing coarse grains and oilseed meal in feed rations for livestock.
Prior studies have estimated that a liter of bioethanol requires 263−784 L of water from corn farm to fuel pump, but these estimates have failed to account for the widely varied regional irrigation practices. By using regional time-series agricultural and ethanol production data in the U.S., this paper estimates the state-level field-to-pump water requirement of bioethanol across the nation. The results indicate that bioethanol’s water requirements can range from 5 to 2138 L per liter of ethanol depending on regional irrigation practices.
There is a strong societal need to evaluate and understand the sustainability of biofuels, especially because of the significant increases in production mandated by many countries, including the United States. Sustainability will be a strong factor in the regulatory environment and investments in biofuels. Biomass feedstock production is an important contributor to environmental, social, and economic impacts from biofuels.
The water consumption and agrochemical use during biofuel production could adversely impact both availability and quality of a precious resource.
In this paper, we assess what is known or anticipated about environmental and sustainability factors associated with next-generation biofuels relative to the primary conventional biofuels (i.e., corn grain-based ethanol and soybean-based diesel) in the United States during feedstock production and conversion processes. Factors considered include greenhouse (GHG) emissions, air pollutant emissions, soil health and quality, water use and water quality, wastewater and solid waste streams, and biodiversity and land-use changes.
This article investigates ethanol and its integration into the petroleum supply chain. Recent state and federal mandates require varying levels of ethanol in reformulated gasoline (RFG) and, consequently, new complexities are being introduced into what has to this point been a streamlined petroleum supply chain.
The location of ethanol plants is determined by infrastructure, product and input markets, fiscal attributes of local communities, and state and federal incentives. This empirical
analysis uses probit regression along with spatial clustering methods to analyze investment activity of ethanol plants at the county level for the lower U.S. 48 states from 2000 to 2007.
The availability of feedstock dominates the site selection decision. Other factors, such as access to navigable rivers or railroads, product markets, producer credit and excise tax
Supply chain management involves all of the activities in industrial organizations from raw material procurement to final product delivery to customers. The main aim in supply chain management is to satisfy production requirements, while optimizing the economic objectives. In traditional fossil fuel supply chains, huge amounts of fossil fuels are transported via pipelines or tankers with very small costs. These fuels can be transformed into other sources of energy or transportation fuels at their destination points.
Ethanol production using corn grain has exploded in the Upper Midwest. This new demand for corn, and the new opportunities
for value-added processing and cattle production in rural communities, has created the best economic development
opportunity in the Corn Belt states in a generation or more. Ethanol demand has increased rapidly recently because of favorable
economics of ethanol vs. gasoline, and the need for a performance enhancer to replace MTBE (methyl tertiary-butyl ether)
The U.S. Geological Survey (USGS) 2001 National Land Cover Database (NLCD) was compared to the U.S. Department of Agriculture (USDA) 2002 Census of Agriculture. Wecompared areal estimates for cropland at the state and county level for 14 States in the Upper Midwest region of the United States. Absolute differences between the NLCD and Census cropland areal estimates at the state level ranged from 1.3% (Minnesota) to 37.0% (Wisconsin). The majority of counties (74.5%) had differences of less than 100 km2. 7.2% of the counties had differences of more than 200 km2.
Ground-based data on crop production in the USA is provided through surveys conducted by the National Agricultural Statistics Service (NASS) and the Census of Agriculture (AgCensus). Statistics from these surveys are widely used in economic analyses, policy design, and for other purposes. However, missing data in the surveys presents limitations for research that requires comprehensive data for spatial analyses.We created comprehensive county-level databases for nine major crops of the USA for a 16-yr period, by filling the gaps in existing data reported by NASS and AgCensus.
This paper describes a methodology to explore the (future) spatial distribution of biofuel crops in Europe. Two main types of biofuel crops are distinguished: biofuel crops used for the production of biodiesel or bioethanol, and second-generation biofuel crops. A multiscale, multi-model approach is used in which biofuel crops are allocated over the period 2000?2030. The area of biofuel crops at the national level is determined by a macroeconomic model. A spatially explicit land use model is used to allocate the biofuel crops within the countries.