KDF Search Results

The compatibility of elastomeric materials used in fuel storage and dispensing applications was determined for test fuels
representing neat gasoline and gasoline blends containing 10 and 17 vol.% ethanol, and 16 and 24 vol.% isobutanol. The
actual test fuel chemistries were based on the aggressive formulations described in SAE J1681 for oxygenated gasoline.
Elastomer specimens of fluorocarbon, fluorosilicone, acrylonitrile rubber (NBR), polyurethane, neoprene, styrene

The compatibility of plastic materials used in fuel storage and dispensing applications was determined for test fuels representing gasoline blended with 25 vol.% ethanol and gasoline blended with 16 and 24 vol.% isobutanol. Plastic materials included those used in flexible plastic piping and fiberglass resins. Other commonly used plastic materials were also evaluated. The plastic specimens were exposed to Fuel C, CE25a, CiBu16a, and CiBu24a for 16 weeks at 60oC.

The present study experimentally investigates spark-ignited combustion with 87 AKI E0 gasoline in its neat form and in
mid-level alcohol-gasoline blends with 24% vol./vol. iso-butanol-gasoline (IB24) and 30% vol./vol. ethanol-gasoline (E30).
A single-cylinder research engine is used with a low and high compression ratio of 9.2:1 and 11.85:1 respectively. The
engine is equipped with hydraulically actuated valves, laboratory intake air, and is capable of external exhaust gas

The Energy Independence and Security Act (EISA) of 2007 is an omnibus energy policy law designed to move the United States toward greater energy security and independence. A key provision of EISA is the Renewable Fuel Standard (RFS), which requires the nation to use 36 billion gallons per year (BGPY) of renewable fuel in vehicles by 2022.* Ethanol is the most widely used renewable fuel, and increasing the allowable ethanol content from 10% to 15% is expected to push renewable fuel consumption to as much as 21 BGPY.

The present study experimentally investigates spark-ignited combustion with 87 AKI E0 gasoline in its neat form
and in midlevel alcohol−gasoline blends with 24% vol/vol isobutanol−gasoline (IB24) and 30% vol/vol ethanol−gasoline (E30).
A single-cylinder research engine was used with an 11.85:1 compression ratio, hydraulically actuated valves, laboratory intake air,
and was capable of external exhaust gas recirculation (EGR). Experiments were conducted with all fuels to full-load conditions

The present study experimentally investigates spark-ignited combustion with 87 AKI E0 gasoline in its neat form
and in midlevel alcohol−gasoline blends with 24% vol/vol isobutanol−gasoline (IB24) and 30% vol/vol ethanol−gasoline (E30).
A single-cylinder research engine is used with an 11.85:1 compression ratio, hydraulically actuated valves, laboratory intake air,
and was capable of external exhaust gas recirculation (EGR). Experiments were conducted with all fuels to full-load conditions

In support of the national goals for biofuel use in the United States, numerous technologies have been developed that convert biomass to biofuels. Some of these biomass to biofuel conversion technology pathways are operating at commercial scales, while others are in earlier stages of development. The advancement of a new pathway toward commercialization involves various types of progress, including yield improvements, process engineering, and financial performance.

The Energy Independence and Security Act (EISA) of 2007 is an omnibus energy policy law designed to
move the United States toward greater energy security and independence. A key provision of EISA is the
Renewable Fuel Standard (RFS) which requires the nation to use 36 billion gallons per year (BGPY) of
renewable fuel in vehicles by 2022.1 Ethanol is the most widely used renewable fuel, and increasing the
allowable ethanol content from 10% to 15% is expected to push renewable fuel consumption to 21BGPY.

This article summarises the compatibility of six elastomers – used in fuel
storage and delivery systems – with test fuels representing gasoline blended
with up to 85% ethanol. Individual coupons were exposed to test fuels for four
weeks to achieve saturation. The change in volume and hardness, when wetted
and after drying, were measured and compared with the original condition.

The Energy Independence and Security Act (EISA) of 2007 was an omnibus energy policy law designed to move the United States toward greater energy security and independence.1 A key provision of EISA modified the Renewable Fuel Standard (RFS) which requires the nation to increase the volume of renewable fuel blended into transportation fuels from 7.5 billion gallons by 2012 to 36 billion gallons by 2022. Ethanol is the most widely used renewable fuel, and increasing the ethanol content in gasoline to 15% offers a means of getting significantly closer to the 36 billion gallon goal.

Spark-ignition (SI) engines with direct-injection (DI) fueling can improve fuel economy and vehicle power beyond
that of port fuel injection (PFI). Despite this distinct advantage, DI fueling often increases particle number emissions, such that SI
exhaust may be subject to future particle emissions regulations. In this study, ethanol blends and engine operating strategy are
evaluated for their effectiveness in reducing particle emissions in DI engines. The investigated fuels include a baseline emissions

Ethanol offers significant potential for increasing the
compression ratio of SI engines resulting from its high octane
number and high latent heat of vaporization. A study was
conducted to determine the knock limited compression ratio
of ethanol - gasoline blends to identify the potential for
improved operating efficiency. To operate an SI engine in a
flex fuel vehicle requires operating strategies that allow
operation on a broad range of fuels from gasoline to E85.
Since gasoline or low ethanol blend operation is inherently

The compatibility of elastomer materials used in fuel dispensers was assessed for a gasoline standard containing 0, 10, 17, and 25 volume percent of aggressive ethanol. Specimens of fluorocarbon, fluorosilicone, acrylonitrile butadiene rubber (NBR), styrene butadiene rubber (SBR), silicone rubber, neoprene and polyurethane were immersed in test fuels flowing at a rate of 0.8m/s for 4 weeks at 60oC and then dried for 20h at 60oC.

The Energy Independence and Security Act (EISA) of 2007 was an omnibus energy policy law designed
to move the United States toward greater energy security and independence. A key provision of EISA is
the Renewable Fuel Standard (RFS) which requires the nation to use 36 billion gallons of renewable fuel
in vehicles by 2022. Ethanol is the most widely used renewable fuel, and a significant portion of the
36 billion gallon goal can be achieved by increasing the ethanol in gasoline to 15%. In fact in March

The compatibility of selected metals representative of those commonly used in dispensing
systems was evaluated in an aggressive E20 formulation (CE20a) and in synthetic gasoline
(Reference Fuel C) in identical testing to facilitate comparison of results. The testing was
performed at modestly elevated temperature (nominally 60°C) and with constant fluid flow in an
effort to accelerate potential interactions in the screening test.
Based on weight change, the general corrosion of all individual coupons exposed in the vapor

Ethanol is a very attractive fuel from an end-use perspective because it has a high chemical octane number and a high
latent heat of vaporization. When an engine is optimized to take advantage of these fuel properties, both efficiency and
power can be increased through higher compression ratio, direct fuel injection, higher levels of boost, and a reduced need
for enrichment to mitigate knock or protect the engine and aftertreatment system from overheating.

The US is currently the world's largest ethanol producer. An increasing percentage is used as transportation fuel, but debates continue on its costs competitiveness and energy balance. In this study, technological development of ethanol production and resulting cost reductions are investigated by using the experience curve approach, scrutinizing costs of dry grind ethanol production over the timeframe 1980–2005. Cost reductions are differentiated between feedstock (corn) production and industrial (ethanol) processing.

A dry-grind ethanol from corn process analysis is performed. After defining a complete model of the process, a pinch technology analysis is carried out to optimise energy and water demands. The so-defined base case is then discussed in terms of production costs and process profitability. A detailed sensitivity analysis on the most important process and financial variables is carried out. The possibility to adopt different alternatives for heat and power generation combined to the process is evaluated.

Production costs of bio-ethanol from sugarcane in Brazil have declined continuously over the last three decades. The aims of this study are to determine underlying reasons behind these cost reductions, and to assess whether the experience curve concept can be used to describe the development of feedstock costs and industrial production costs. The analysis was performed using average national costs data, a number of prices (as a proxy for production costs) and data on annual Brazilian production volumes.

The important key technologies required for the successful biological conversion of lignocellulosic biomass to ethanol have been extensively reviewed. The biological process of ethanol fuel production utilizing lignocellulose as substrate requires: (1) delignification to liberate cellulose and hemicellulose from their complex with lignin, (2) depolymerization of the carbohydrate polymers (cellulose and hemicellulose) to produce free sugars, and (3) fermentation of mixed hexose and pentose sugars to produce ethanol.